WEB100 Enabled Statistics:
Checking for Middleboxes . . . . . . . . . . . . . . . . . . Done
checking for firewalls . . . . . . . . . . . . . . . . . . . Done
running 10s outbound test (client-to-server [C2S]) . . . . . 88.0kb/s
running 10s inbound test (server-to-client [S2C]) . . . . . . 536.20kb/s
------ Client System Details ------
OS data: Name = Windows 2000, Architecture = x86, Version = 5.0
Java data: Vendor = Sun Microsystems Inc., Version = 1.5.0_06
------ Web100 Detailed Analysis ------
Cable modem/DSL/T1 link found.
Link set to Full Duplex mode
No network congestion discovered.
Good network cable(s) found
Normal duplex operation found.
Web100 reports the Round trip time = 251.79 msec; the Packet size = 1452 Bytes; and
No packet loss was observed.
S2C throughput test: Packet queuing detected: 97.69%
This connection is receiver limited 88.69% of the time.
Increasing the the client's receive buffer (17.0 KB) will improve performance
This connection is network limited 10.92% of the time.
Web100 reports TCP negotiated the optional Performance Settings to:
RFC 2018 Selective Acknowledgment: ON
RFC 896 Nagle Algorithm: ON
RFC 3168 Explicit Congestion Notification: OFF
RFC 1323 Time Stamping: OFF
RFC 1323 Window Scaling: OFF
Server '**.*.***.***' is not behind a firewall. [Connection to the ephemeral port was successful]
Client is probably behind a firewall. [Connection to the ephemeral port failed]
Information: Network Middlebox is modifying MSS variable
Server IP addresses are preserved End-to-End
Information: Network Address Translation (NAT) box is modifying the Client's IP address
Server says [***.***.***.**] but Client says [***.***.*.**]
Marcadores